How To Draw A Lily Flower Step By Step

Download Article

Download Commodity

Lilies are cute flowers with an elegant however simple shape, making them relatively like shooting fish in a barrel to sketch. At that place are several dissimilar techniques you can use to depict a lily, and so experiment until yous discover the method that works best for you.

1. 1

   Draw a circle attached to a line. Sketch a small circle, and then draw a long, slightly curved line extending down from the five-o'clock position of the circle.

   • The circle will become the bud of the lily and the line will become the stem.
   • Connect the line straight to the outline of the circle and make information technology roughly v to seven times longer than the circle diameter.

2. 2

   Arrange seven short lines in the center of the circle. Draw vii short, slightly curved lines extending outward from the center of the circle.

   • These lines will set the direction of the lily petals.
   • The curve of each line should open slightly downwardly.
   • The lines do not demand to be even in size, but they should range from ane-4th to i-half the size of the stem. Note that the lines pointing contrary the stem should be longer than those straight side by side to it.
   • The lines do non demand to be symmetrical, either, but they should be spaced apart at relatively fifty-fifty intervals.

   Advert

3. 3

   Environment the petal lines with contours. Draw an outline around each petal line, allowing the contours to meet and overlap near the center of the flower.

   • These contours will become the petals.
   • Eye the petal line within each contour, keeping an even corporeality of infinite on either side of each line. Notation that the amount of space between center lines and contours may vary from petal to petal.
   • The contours should touch without intersecting ane another. If you do cross some of the contours, you'll need to erase the intersecting segment afterward.

4. four

   Mankind out the necessary lines. Erase the initial petal lines, leaving the contours in place. Right the petal contours as needed to make each one await more realistic.

   • Some contours may non demand whatsoever adjustments, while others volition. In particular, you should try to narrow the tips of the contours to prevent them from looking like perfect ovals.
   • Add detail to the stalk during this pace, as well. Brand the curve announced sharper, and depict a parallel line to one side of the original line to give the stem width.

5. 5

   Add leaves to the stems. Sketch several leaves on both sides of the stalk. You'll only need roughly five to 8.

   • Vary the direction and size of each leaf. Each should await like narrow, curved teardrops. Some should curve upward while others should curve downward.
   • Do non draw the leaves in fifty-fifty pairs. Space them apart at random intervals.

6. 6

   Create more detail inside the blossom. Describe the stamen in the center of the lily and lightly sketch line markings inside each petal.

   • The stamen volition look like a cluster of brusk, narrow stems, and each stem should accept a pocket-size rounded block at the tip. Place five to eight of these shapes within the centre of the lily, making it no higher than the largest, almost upright petal.
   • For the petal lines, lightly sketch two to three lines in each petal that highlight the direction of the petal. these lines should only occupy office of the petal interior, though, and should not extend from the base to the tip.

7. 7

   Shade or colour the lily as desired. By this point, you should already take a completed lily course. Yous can add shading or colors to the moving picture to arrive even more realistic.

   • To add shading, endeavour to visualize which areas of the lily would receive direct lite if it were real. Any area that would not get hit with light should exist shaded, with the darkest areas being those hidden by other parts of the blossom.
   • If you want to add together color, utilize lighter shades on the areas that would receive direct sunlight and darker shades on those that would be hidden in shadow.

   Advertizing

1. one

   Describe a circumvolve. Sketch a circle in the center of your paper, making the diameter approximately one-third as large as you wish to make the finished lily.

   • This circle will become a hidden bud or base for the lily petals. You'll need to draw over it, then keep the pencil lines light enough to erase later.

2. 2

   Add two petals to the right of the circle. Draw ii trumpet-shaped petals, placing them on the right side of the circle.

   • Trumpet-shaped contours are similar to teardrop-shaped contours, but the outlines should be curvier.
   • Both petals should be roughly twice as large equally the circumvolve.
   • The wide portion of i petal should betoken upward with the tip pointing down. Identify this petal direct over the right side of the circumvolve, allowing it to slightly overlap the circle itself.
   • The wide portion of the other petal should point downwardly with the tip pointing upwards. It should touch on the side of the circumvolve and the side of the other petal.

3. iii

   Identify ii more than petals on the opposite side. Describe two more trumpet-shaped petals, placing them on the left side of the circle.

   • Depict the top petal showtime, followed by the lesser i. Both petals should be attached to the contours of the first 2, and the base of operations of each 1 should be subconscious beneath the existing petals.
   • The size of these petals should roughly match the size of the original two, and they should completely comprehend the remaining width and height of the circle.
   • Angle these petals in the same general direction every bit the starting time two petals.

4. iv

   Sketch out ii more petals. Place ii minor, pointed petals in between some of the other pairs. The offset should get in between the top two petals. The second should go in betwixt the ii left petals.

   • These petals should be slightly curved just slightly straighter than the others.
   • Only draw the tips of each petal. Doing so makes it appear equally though the lower portions are hidden by the upper petal layers.

5. 5

   Draw center lines down each petal. Carefully draw a smooth line downward the center of each existing petal contour.

   • Keep each line in the center of its respective petal and curve the line along the bend of the petal. Extend information technology from base to tip, too.

6. 6

   Create the stamen. Draw 5 to seven lines sticking out from the center of the lily. Describe small, flat ovals at the stop of each line to finish the stamen.

   • Each of these lines should be no longer than one-half the length of the longest petal.
   • Position the stamen so that they point out to the left. Let the elevation few curve upward, just give the lesser few a slight curve downward.

7. 7

   Attach the horn-shaped stem. Draw a horn shape coming from the base of operations of the bloom, then sketch a downward pointing stem at the base of this horn.

   • The horn should look like a "V" tips on its side. Point the wide portion toward the original circle and hide it below the petals. Angle the narrow portion abroad from the petals and do not close off the tip.
   • From the narrow tip, depict two parallel, curves lines. Both lines should point downward. These will be the stem of the bloom.

8. 8

   Clean upwards the drawing. Erase your starting circle and any other stray lines. Leave the lily as it is or add other details as desired.

   • Consider adding long, slivered leaves extending upward from the base of the stem.
   • Add together shading or coloring to the picture, if desired. Use lighter shading or colors on the areas receiving direct light, but use heavier shading or darker colors on whatsoever area hidden by shadow.

   Advertisement

1. i

   Draw a ring of ovals. Lightly sketch six ovals, arranging them into the course of a ring.

   • These ovals will become the petals of the lily.
   • The narrow ends of each oval should point toward the middle, rather than lying against the perimeter of the ring.
   • Permit the ovals to slightly overlap at the eye of the ring.

2. two

   Define the shape of each petal. Go back over each oval, altering the outline slightly to define the petal shape.

   • For each petal, you'll demand to make the blunt, rounded tip a picayune more pointed. You should as well curve the sides of each petal slightly. Each petal should curve in toward the right.
   • While defining each petal outline, you should as well decide how the petals fall. The petals on the right are "closer" to the viewer, so the full outlines should exist visible. Equally the petals progress toward the left, the overlapping sections will be "hidden" below the closer petals.

3. 3

   Sketch the stamen. Draw iv curved line pairs (eight lines total), starting each set in the middle of the lily. Top each pair with a small oval.

   • These will be the stamen of the lily.
   • Keep the lines within each pair close together. The oval at the top of each pair should close off the lines, making the resulting shape announced solid.
   • Each stamen should curve slightly downward. Try to make them most one-half as long as the lily petals, and proceed them relatively even in length.

4. four

   Connect ii lines to the base of the lily. Draw two slightly curved lines at the lesser of the lily. These lines should both fall in betwixt the same 2 petals on the bottom right side.

   • These lines volition create the stem of the lily.
   • Both lines should curve away from the blossom. The space in between the lines should be slightly wider at the top and narrower toward the bottom.

5. v

   Particular each petal. Depict a single line down the length of each petal. Position each of these lines in the middle of its respective petal.

   • The lines should span most of the length without actually touching the bottom or peak of each petal.
   • Each line should follow the curve of its respective petal.

6. six

   Erase any stray marks. Darken the lines you wish to keep by tracing over them again in pencil. Erase whatsoever lines yous do not wish to keep, working carefully to avoid the permanent lines.

   • If y'all practise erase ane of your permanent lines by accident, redraw the line equally soon equally you notice the mistake.

7. 7

   Shade or colour the lily as desired. the shape of the lily is already done. If you want to brand it more realistic, though, y'all could shade information technology with pencil or color it in.

   • Regardless of which pick you choose, effort to visualize how the lily would look in natural light. Whatever area that would come into straight contact with a light source should exist kept lighter, just any area that would be hidden in shadow should be made darker.

   Advertisement

Add New Question

• Question

  What is the color of a lily?

  

  This answer was written by one of our trained team of researchers who validated information technology for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Lilies come in many different colors, but the near common are white, pink, yellow, red, and orange.

• Question

  What's an easy fashion to draw a lily?

  

  This answer was written by one of our trained team of researchers who validated it for accurateness and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  The rounded figure technique is very easy. Merely sketch in the basic shapes of the petals around a round centre, then add the details, such as the stem, leaves, and stamens. When you lot're done, erase the sketchy guidelines you used to rough in the basic shapes.

• Question

  How do you describe a tiger lily?

  

  This answer was written past one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Tiger lilies are bright orange, with nighttime brownish spots on the leaves. Draw the lily the aforementioned mode you would whatsoever other lily, but make the petals curve dorsum and draw in some long stamens. Shade the petals in orange, then depict parallel rows of elongated dark-brown spots on each petal.

Enquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertizing

Video

Thanks for submitting a tip for review!

Things Yous'll Need

• Pencil
• Eraser
• Paper

About This Article

Article Summary X

To describe a lily, first past sketching a minor circle with a long, curved line coming downwards from the 5 o'clock position for the flower'south bud and stem. Then, depict vii short, slightly curved lines extending outward from the circle at fairly even intervals. Next, describe an outline around each of the seven lines to form the petals, letting these lines meet and overlap near the circle. Afterward you draw the petals, erase the initial petal lines and sketch 5-8 leaves coming off the stem in random spots. Finally, draw a cluster of short, narrow stems in the heart for the stamen. To learn how to describe a lily using rounded-effigy or guided freehand technique, keep reading!

Did this summary assist you?

Thanks to all authors for creating a page that has been read 93,109 times.

Did this commodity help you?

Source: https://www.wikihow.com/Draw-a-Lily

Posted by: levinenes1943.blogspot.com

Share this post